power control switch

[charleysTNT]

Here are the pictures I hope
[ATTACH][/ATTACH]

[The Don]

thankx for the info chaps, popped into Harry Nash yesterday for an indicator bulb, and mentioned the power button sticker. they called motogb who said that they'd had a shipment of stickers from italy just in.......hmmm seems to me its a 'Known problem' anyway ones on its way down to me soon! cant say fairer than that!!

[Madwog72]

Originally Posted by dodgybollox

Sorry to hear about your woes with the tnt button charleysTNT. I only saw this post today, You can change the button's bulb without removing the whole switch just leave in full power position and pull off the bit you press that has the TNT logo on, Use tweezers/forceps to extract the bulb , If you struggle to grip the blown bulb put a tiny blob of superglue on it let it set and bulb pops out easily, Hope this will help someone on the forum

Bloody hell thanks for that Dodgy i was woundering how to do that job.
and sorry to here that you broke yours charleysTNT.is that a new button you've got there instead of the original one mate with a blue light in it....

madwog
(33,000km)

[oztnt]

OK I've got the bulb out so where do I get a replacement locally. Checked RS and Farnell catalogues but no luck.
Cheers Mike.

[Laurencewhite]

Dear Dodgybollox,
how did you come to learn about this amazingly simple fix!

Dodgy works for one of the UK Benelli Dealers. (missed you when I was down at KJM last week Andy. Didn't know you had been moved to Millennium)

Oh, and I use the term 'works' loosely, maybe I would be better saying that he is employed by them.

[charleysTNT]

Originally Posted by Madwog72

Bloody hell thanks for that Dodgy i was woundering how to do that job.
and sorry to here that you broke yours charleysTNT.is that a new button you've got there instead of the original one mate with a blue light in it....

madwog
(33,000km)

Yes, new chrome button with blue light to match the dash, to all on the forum be very very careful when you remove the switch as the plastic legs will break off. Light is on in power mode, off when not like the original and is press in and out.

[richardm]

so where do u get the bulbs from ??and wat type ?

[Canary Trek]

Originally Posted by richardm

so where do u get the bulbs from ??and wat type ?

Hola.

Hello. I removed the bulb and is similar
14 v... 5-10 w

http://es.farnell.com/jsp/search/pro...-bf9f-00001000

[patkin]

Guys

When I remove small inaccessible bulbs I get a bit of appropriately sized rubber tube and push it over to grip and extract it.

Just a handy tip