Water temperature sensor plug pins on Tornado and TnT
Benelli Motorcycle Forum - Benelli Bike Discussions - Powered by vBulletin
Results 1 to 2 of 2
Like Tree2Likes
  • 2 Post By Rick67

Thread: Water temperature sensor plug pins on Tornado and TnT

  1. #1
    Senior Member
    Member #
    39
    Join Date
    Dec 2006
    Location
    Perth west Oz!
    Posts
    3,068

    Water temperature sensor plug pins on Tornado and TnT

    Hi guys, my mates sport Evo looks like it has failing wiring on the loom just before the plug end of the water temperature sensor (the one that goes in the back right hand side of the cylinder head. i was hoping i could cut the section out and reattach the pins that go into the female plug to fix the issue. otherwise it looks like you can but the "service loom" parts of the wiring loom (city motors say about 100 euros). does anyone know what these connectors pins are called and what sort of crimping pliers i might need.

  2. #2
    Senior Member Rick67's Avatar
    Name
    Rick
    Member #
    16761
    Join Date
    Sep 2017
    Location
    Brynamman ,Wales
    Posts
    761
    I think the connector that goes onto the temperature sensor is a Bosch EV1 type ..
    I'll just go strip my bike appart for a look just for something to do ..
    GBo and ron d like this.

Sponsors

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Google+