Benelli Forum banner

benelli 650s charging problem

2K views 2 replies 3 participants last post by  atmellovw 
#1 ·
hi, i have a 1972 benelli 650s that is not charging properly, it is only reading around 10 v when the engine is runing at around 3000 revs,can any help me with what to look for or possible faults it could be please,thanks in advance,dave.
 
#3 ·
Check the rectifier and regulator per the shop manual if you have one. If you have to start swapping out parts to remedy the problem note that the Bosch parts (stator, rotor, rectifier, regulator) on your bike are the same as those that were used on the smaller BMW''s of the same era as well as Moto Guzzis. Knowing this will help when you search EBay or other resources.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top