Nuts
Benelli Motorcycle Forum - Benelli Bike Discussions - Powered by vBulletin
Results 1 to 4 of 4

Thread: Nuts

  1. #1
    Junior Member
    Name
    dave townend
    Member #
    20047
    Join Date
    Feb 2020
    Location
    lincoln
    Posts
    13

    Nuts

    hi guys i am after a parts supplier that has M14 x 1.0 pitch nyloc nuts for benelli 250 2c fof clutch and sprocket if you have some and want to sell struggling to find

  2. #2
    Senior Member
    Name
    Cam Douglas
    Member #
    18563
    Join Date
    Jul 2018
    Location
    Tasmania
    Posts
    289
    Good luck finding Nyloc nuts in M14 x 1.0. That's a non-standard metric thread.
    M14 normally comes in pitches of 2mm (standard) or 1.5mm (fine)

    You can get M14 x 1.0 in plain hex or slotted (castellated) hex, but I doubt you'll find 'em with nylon inserts.

    As far as I'm aware, Nyloc nuts usually only come in standard coarse thread. I'm happy to be proven wrong though.

  3. #3
    Senior Member Engenia's Avatar
    Name
    Errol Kowald
    Member #
    27
    Join Date
    Dec 2006
    Location
    Canberra, ACT, Australia
    Posts
    5,622
    I suspect you'll have to improvise.
    If you can get an M14 x 1.0 nut, or have one made by a friendly forum member with a lathe, team it up with a Belville washer and maybe Loctite 243 if you are paranoid.
    You could even make a nut with a couple of horizontal slots in it, deformed to reduce the pitch on the last thread.
    hooroo, Errol www.engenia.com.au [139,200 km - and counting .....]

  4. Remove Advertisements
    BenelliForum.com
    Advertisements
     

  5. #4
    Junior Member
    Member #
    14167
    Join Date
    Nov 2015
    Location
    Massachusetts, USA
    Posts
    22
    Just use Loctite.

    Joe

Sponsors

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Google+