Injector Light
Benelli Motorcycle Forum - Benelli Bike Discussions - Powered by vBulletin
Results 1 to 3 of 3

Thread: Injector Light

  1. #1
    Junior Member
    Name
    RICHARD MAZE
    Member #
    13354
    Join Date
    Sep 2013
    Location
    Lisburn, Northern Ireland
    Posts
    7

    Injector Light

    Hi Guys
    With time on my hands and a Tornado with the dreaded coil problem I decided to change the coil. I am not mechanically minded but all went reasonably well until I had finished. The bike now runs perfectly but the injector light on the dash stays permanently on. Can the light be reset? Is it likely that I have not connected a cable or damaged something when putting the tank back on? Any thoughts would be very welcome. Ta

  2. #2
    Senior Member Engenia's Avatar
    Name
    Errol Kowald
    Member #
    27
    Join Date
    Dec 2006
    Location
    Canberra, ACT, Australia
    Posts
    5,668
    Quite possibly you turned the ignition on with one of the coils disconnected.
    If the engine is running fine just ignore the ECU light. It will go out after a few run cycles. The error won't be cleared though. You can only do that with a diagnostics tool like Axione or TuneECU.
    hooroo, Errol www.engenia.com.au [139,200 km - and counting .....]

  3. #3
    Junior Member
    Name
    RICHARD MAZE
    Member #
    13354
    Join Date
    Sep 2013
    Location
    Lisburn, Northern Ireland
    Posts
    7
    Many thanks Errol. I will get it tested.

Sponsors

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Google+