Benelli Forum banner
1 - 10 of 10 Posts

Roman

· Registered
Joined
·
57 Posts
Discussion starter · #1 ·
Hello
I have tryed to remap my tnt1130 but the connection stopted at 50% done. Now i can not connect comp to bike. And ofcourse it doesn?t run now.
Can anyone help me if there is anything i can do?
I have tryed and removed drivers and installed them again. Live bike without battery for few hourse, milion times turned off comp and tryed it again. But nothing. Can?t get that green bar
Thank you
Best regards from Slovenia
 
A suggestion you can try if not tried already is to keep a battery charger connected whilst connecting and downloading, also I have found sometimes it will not connect if set auto connect,then does if connect manually from drop down menu. Sometimes I have closed the program then turned laptop off then tried again. I have not used tuneecu for a while but have a friends new LE to check and put later maps on this weekend..
 
Hi
I have tryed everything but this axone. I don?t know what it is. Can you please help me with it?
Thanks
Its the device benelli dealer use instead of tuneecu.
The only option I know is that you send your ecu to a benelli dealer who has an axone so he can connect and upload the bios again than you should get a connection with tuneecu again.

Gesendet von meinem SM-P905 mit Tapatalk
 
Ok so it is diagnostic tool. Thank you. I will try to find somebody
If you cant find anyone in slovenia, get in contact with alex (info@maniacmotors.de) he can help you with that you are not the first and you wont be the last with this problem. He has helped others in this case maybe he knows another solution, too. ;)


Gesendet von meinem SM-P905 mit Tapatalk
 
1 - 10 of 10 Posts