Benelli Forum banner
1 - 18 of 18 Posts

· Registered
Joined
·
122 Posts
Discussion Starter · #4 ·

· No good with spanners....
MV F3 RC, TNT 899
Joined
·
3,488 Posts
Thanks gents. I'm looking at a TNT1130 10k miles and built in 2006

I think I know the previous owner. I think that bike has been in various dealers for years………..


Ive had the 1130 motor in the tornado and if I’m honest, I prefer the 899. I know of a couple of sad 1130 stories, hot start issues and one that proved too much for its owner to remedy. On the other side of the coin I’m sure there are many happy owners……

just my twopenneth…….

fred
 

· No good with spanners....
MV F3 RC, TNT 899
Joined
·
3,488 Posts
Actually, now looking at the bike, it may have been a different owner.

The guy I was thinking of was oxford tnt on this forum.

fred
 
  • Like
Reactions: Simon-R

· No good with spanners....
MV F3 RC, TNT 899
Joined
·
3,488 Posts
Thanks for all your good input Fred.
Much appreciated
Simon
If you are thinking of an 1130, don’t go near this one…….


fred
 
  • Like
Reactions: Simon-R

· No good with spanners....
MV F3 RC, TNT 899
Joined
·
3,488 Posts
🙈🙈🙈🙈🙈😬😬😬😬😬
 

· Registered
Joined
·
122 Posts
Discussion Starter · #11 ·
I've had some paperwork sent thru for the red 1130. it used to belong to a guy called Neil Hutt back in 2012 and had work done on it at Stretffords of Worcestershire. The reg number then was PO12GJG. The last bit of peperwork is from an MOT which was done in Oldham. The bike is on a private plate now which is MB12TNT. Various bills from both Maniac and Larsson which show a bit of money being spent over the years
 

· No good with spanners....
MV F3 RC, TNT 899
Joined
·
3,488 Posts
I've had some paperwork sent thru for the red 1130. it used to belong to a guy called Neil Hutt back in 2012 and had work done on it at Stretffords of Worcestershire. The reg number then was PO12GJG. The last bit of peperwork is from an MOT which was done in Oldham. The bike is on a private plate now which is MB12TNT. Various bills from both Maniac and Larsson which show a bit of money being spent over the years
That’s the guy, I know Neil very well. If you are still considering it I’ll ask him if I can give you his number?

fred
 

· No good with spanners....
MV F3 RC, TNT 899
Joined
·
3,488 Posts
Message sent
 

· Registered
Joined
·
53 Posts
I have two 1130's and have ridden a 899 for about 4 weeks. My advice for anyone getting into a 1130 is to buy the latest model possible. Ideally >2009, thie z25 gears would have been sorted out and electrics are slightly better too.
 
1 - 18 of 18 Posts
Top