Benelli Forum banner
1 - 1 of 1 Posts

·
Senior Member
Joined
·
903 Posts
Discussion Starter · #1 ·
:hiya: one and all, I though I would inform you of a problem I have found with a TNT (2004 model).

We had a rattle from the engine which turned out to be from the clutch. On strip down all seemed to be well until I turned the basket over, the damper springs were very loose in the holders due to excess movement in the back plate. It will require a new clutch basket assembly to sort the problem out.
The bike has only done a genuine 1700 miles so I can only assume that this was a manufacturing defect.

If you get a rattle from the clutch don't ride it until you have investigated the noise, if it fails the damage will be immense. Fortunately we spotted this before it got to this stage.
 
1 - 1 of 1 Posts
Top