Benelli Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
57 Posts
Discussion Starter · #1 · (Edited)
Hello guys,

I have the workshop manual for my '04 TnT but can someone please confirm the valve play adjustments spects.

In the workshope manual page 67 is written:

Suction = 0.30 ± 0.35 mm
Exhaust = 0.35 ± 0.40 mm

Because the -/+ sing is confusing :confused:

must be from 0,30 to 0,35 correct?
and
must be from 0,35 to 0,40 correct?


Thanx in advance

Best regards to all. :bow:
 

·
Registered
Joined
·
864 Posts
Hello guys,

I have the workshop manual for my '04 TnT but can someone please confirm the valve play adjustments spects.

In the workshope manual page 67 is written:

Suction = 0.30 ± 0.35 mm
Exhaust = 0.35 ± 0.40 mm

Because the -/+ sing is confusing :confused:

must be from 0,30 to 0,35 correct?
and
must be from 0,35 to 0,40 correct?


Thanx in advance

Best regards to all. :bow:
You are correct! the manual is misleading isn't it!

0.30 to 0.35mm for inlet and 0.35 to 0.40mm for exhaust on a cold engine :)
 

·
Registered
Joined
·
57 Posts
Discussion Starter · #4 ·
Thanx Neil for your reply, Ian you are correct also the valve play for tnt and tre is not the same :blur:

On page 133 it's written correctly, silly me :beat: :sleepy:

Cheers guys :)
 
1 - 5 of 5 Posts
Top