Benelli Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
67 Posts
Discussion Starter · #1 ·
ive down loaded workshop manual but i gone up and down pages with no luck.fairing and tank is off and air filter element out.now what? ill change these plugs if it kills me
 

·
Registered
Joined
·
177 Posts
Hi fella your almost there from what I can remember the air box is held on to the throttle bodies by three claps "that figure's" :doh: and they have allen key bolts I think about a 3mm allen key should do it just have a feel around from the back end of the air box underneath they are there I promise.You don't have to take then all the way out just slacken them off and the air box should come off,remember to release the cable for the sensor as well.It may be worth doing the air box drain mod and relocating the air box sensor while it's off see engnia's web site http://www.engenia.com.au/ for all the mods and other stuff best of luck fella :)
 

·
Super Moderator
Joined
·
7,774 Posts
..........or you could try the hair dryer trick as detailed in this thread.
 
1 - 3 of 3 Posts
Top