Benelli Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hello everyone,

First classic bike, first forum post, all round first timer. I'm halfway through overhauling my forks but struggling to find the various circlips and snap rings that locate nylon bushes on the stanchion. These pics show the components:

https://shop.strato.de/WebRoot/Stor.../Klassiker/50_Turismo/Bild_3/50-Turismo_3.jpg

Wood Audio equipment Font Gas Circle

I have found some of what I need on engineering suppliers' sites but I would have to buy them in huuuge quantities. I have tried benelli-bauer.com and lots of auto/engineering parts suppliers in person.

Does anyone have any ideas?! Thanks
 

·
Registered
Joined
·
769 Posts
try some of the motor factors, they usually carry a range of circlips.
 

·
Registered
Joined
·
769 Posts
just had another thought, is there anyone near you that repairs hydraulic rams etc,agricultural repair shops etc.
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #4 ·
I have tried motor factors, big ones and independants, with no luck.

Hyrdaulic specialists is a great shout though. Somebody also suggested pretending to be a company, and requesting samples from somewhere like rotorclip.com

At least I have a couple of options to pursue on Monday. Thanks!
 
1 - 4 of 4 Posts
Top