Benelli Forum banner
41 - 60 of 74 Posts

·
Banned
Joined
·
394 Posts
I just want to read the data from from the ECU, like "paul" showed in the gallery, so the 6pin connector should be enough, if I understand the hole thematik. An nothing can happen to the orig. Map on the bike.

Is this correct ? :bow:
i would be very interested in the answer to this aswell guys!!:bow: :bow:
 

·
Banned
Joined
·
2 Posts
benelli service.zip

Hello, I'm Cedric, excuse my English, I'm french, I'm new to the forum, and recently buy a 1130 tnt 2004, while reading this post, I have made the diagnotic cable connection for my Walbro ECU but I can't get the software "benelli service.zip" because the link is dead, does anyone have this software and would like to send it to me? thanks a lot,
Cedric.
 

·
Banned
Joined
·
2 Posts
Benelli Service.zip

hi,
nobody can send me this software??....
it's really important, my bike does not work, and the benelli dealer has not yet axon.....
I have only this solution ....
Please help me...
 

·
Registered
Joined
·
392 Posts
Hi,
We should host this software somewhere reliable can someone send me a copy of this and anything else and I'll put it up. Or if someone has already put it up somewhere give us a link.

Chris
 

·
Registered
Joined
·
2,529 Posts
Hello, I'm Cedric, excuse my English, I'm french, I'm new to the forum, and recently buy a 1130 tnt 2004, while reading this post, I have made the diagnotic cable connection for my Walbro ECU but I can't get the software "benelli service.zip" because the link is dead, does anyone have this software and would like to send it to me? thanks a lot,
Cedric.
Welcome Ced :)
 

·
Banned
Joined
·
43 Posts
Thanks a lot, Roberto:bow:
Hey, guys! Is anybody eager to sell me a custom cable, since the TuneBoy's cable doen't fit?:D
I simply don't rely on our electronic "specialists" and components sold on our market...
 

·
Banned
Joined
·
43 Posts
Excuse my ignorance, but, why wouldn't the TuneBoy cable fit?
Errol, I don't know exactly, but in the previous posts guys said that the signal from the ECU should go to the serial port at first, and only then it can be converted to USB with the help of adapter...
 

·
Banned
Joined
·
43 Posts
Hey guys! Does anybody know whether we can reset and adjust the TPS using this software, or only TuneBoy is able to do this?
 

·
VIN#ten
Joined
·
136 Posts
Walbro diagnostics

I think that by searching Tornado Tre track you can find the guidelines for doing a cable and the early version of the Walbro diagnostics software by an Italian guy a few years back. I did the cable and used to the software on an XP Windows to identify faulty coil, and - think so - to reset TPS couple of years back.

Writing this on mobile, with poor connection in the wilderness, so sorry about not giving you more specific answer (searching is awkward with slow connection and small screen...)


I.e. See rionero963's mails, the connection with gentab is there explained... Later the proper usb to rs232 adapters.
 

·
Banned
Joined
·
43 Posts
I think that by searching Tornado Tre track you can find the guidelines for doing a cable and the early version of the Walbro diagnostics software by an Italian guy a few years back. I did the cable and used to the software on an XP Windows to identify faulty coil, and - think so - to reset TPS couple of years back.

Writing this on mobile, with poor connection in the wilderness, so sorry about not giving you more specific answer (searching is awkward with slow connection and small screen...)


I.e. See rionero963's mails, the connection with gentab is there explained... Later the proper usb to rs232 adapters.
Thanks, I'll check that =)
 

·
Registered
Joined
·
10 Posts
Hi,
I just build up the cabel like is was written / explained before, and I also used an USB-adpter to RS323.

I think the problem, which the most people have, is that the USB-adapter, during the installation, does not use Com 1 or 2. and the the software does not work with it.
My tip ist, after installing the usb-adapter, check if the usb-adapter simulates / uses Com1 or 2.

Nice cabel and software, to help finding errors.

rg
chris
 

·
Banned
Joined
·
4 Posts
hi guys !

i have managed to get a hold (and fast !) of all the necessary parts to make the cable.

is there anything i should look out for when i'm trying this ?
i'm asking as there is no official dealer here (romania) and there is no way i would be able to rewrite the original map.

i have a benelli tnt 2005 , so can i use the TNT03AR.wfl file in the zip file posted here and the software to rewrite the map ?
is this possible ?

thank you for your answers :)
 

·
Registered
Joined
·
334 Posts
Being a bit of a nitwit here. Where does the data+ and data- connect to on the AMP connector? In other words, which one is data transmit and which one is data receive in the rs232 language? Be a bummer to get it wrong and zap the ECU.
 

·
Registered
Joined
·
1 Posts
hello, i have download the service.zip file, and i have a question, what is the differnet between the .mpp file and the .wfl file ? i need both of them to download in the ecu ?
thanks , benellirace
 
41 - 60 of 74 Posts
Top