[freeatlast]

I am looking for a wiring harness/loom for the Tornado 1130 super sport. Thanks

You might be looking for the holy grail,with less than 200 built. I bought up the spares from the only one broken in this country. (no I do not have the loom) . I think there are only about a dozen bikes in the UK.

What is wrong with your current harness ? Take it off the bike and do a full continuity test on it, you will probably find your dead wires. Simply piggy back the wires broken with extra wiring .

 

[Georgehp]

You might be looking for the holy grail,with less than 200 built. I bought up the spares from the only one broken in this country. (no I do not have the loom) . I think there are only about a dozen bikes in the UK.

What is wrong with your current harness ? Take it off the bike and do a full continuity test on it, you will probably find your dead wires. Simply piggy back the wires broken with extra wiring .

I’m not sure what is wrong with it but the fuel pump and ignition won’t power up I’ve tried looking at the loom but I’m not very good with electrical stuff

 

[GBo]

Have you tried a different ecu?

 

[Georgehp]

Yes. It’s definitely the loom

 

[Rick67]

Yes. It’s definitely the loom

Hmmm … I’ve heard a lot of talk about a corroded shared earth connection hidden in the loom close to the starter end of things in the loom .. have a look there too .
have you tried bridging the starter solenoid positive bolts yet with ignition on ?

 

[Georgehp]

I’m in the process of stripping the loom back to bare bones and tracing each wire. One very odd thing is the air temperature sensor wire becomes live with the left front indicator!

 

[Rick67]

I’m in the process of stripping the loom back to bare bones and tracing each wire. One very odd thing is the air temperature sensor wire becomes live with the left front indicator!

Oh that’s weird .. maybe a diode has failed ? If it has any … I’m sure I’ve heard of one somewhere by the headlights

 

[Georgehp]

There’s one in the loom. Not sure what it is yet!