Benelli Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,889 Posts
Discussion Starter · #1 ·
Hi

Can someone confirm what the best way of checking the coolant level is on the tre? I recall seeing posts about not using the levels on the plastic reservoir as it will piss over the engine... Is it best to take the cap off under the seat and fill to the top when cold?

Cheers

Col
 

·
Registered
Joined
·
244 Posts
Cooling level

Easy

1) Fill as recommended in the manual
2) Thrash bike till really hot
3) Stop and vanish in a cloud of steam while it boils over
4) Once you can see the bike again don't top up - it's at the right level

:)

Or as IR suggests, keep it on the minimum line...
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top