Benelli Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
164 Posts
Discussion Starter · #1 ·
Can someone post a pic or two showing how the clutch cable is routed? Mine is routed on the outer side of the fork, causing it to get somewhat tight at full right hand lock.

Thanks!!!
 

·
Senior Member
Joined
·
5,895 Posts
Pity you didn't ask yesterday. I had her stripped to measure the valve clearances.
The cable runs inside the left fork, then over the bottom frame tube and between that tube & the airbox, to the left rear corner of the head, where it is captured by a bracket mounted to the head.
 

·
Registered
Joined
·
1,087 Posts
I’ve changed mine so it stops rubbing a groove in the bottom yoke.
 
1 - 3 of 3 Posts
Top