Benelli Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
205 Posts
Hi Stu,
The first thing I would check is the earth wire(s) from your lights. Then all the wiring to your lights, including the switches. If they are all good then the next suspect is your dynamo. The surest way to test this is to measure the voltage in your battery before you start it. Then start it up and run the engine for at least 10-15 minutes. Then check the voltage again. If the voltage has dropped then either your dynamo is faulty or your regulator.

Good luck,
Richard.
 
1 - 1 of 1 Posts
Top