Benelli Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
136 Posts
Discussion Starter · #1 ·
Hi all .... again !

2 quick questions, please.

1st : Clutch lever adjustment? Been having more & more problems with changing gear, not major problems, just noticeable. Pulled back the rubber cover covering the clutch lever lock nuts to find out they are loose! Obviously some free play is required ..... does anyone know how much should be allowed ? I would imagine it to be somewhere around 10mm but would be nice to find the correct size if anyone does know it ! ( Rusty perhaps :bow: )

2nd question : Chain free play. Seems my chain is a little loose.Again not major but needs a little attention. Does anyone have an idea of the correct free play required ( think you check the top of the change unless I am corrected ! ) and also the correct way to adjust the chain. I do have a paddock stand.

Thanks all .... look forward to your usual prompt replies ...:clap:
 

·
Super Moderator
Joined
·
7,774 Posts
Hi Mark, sounds like you need a copy of the workshop manual

Clutch lever adjustment is on page 56 and Chain adjustment is on page 86

Once you have 'saved' the zip file, if you are asked for a password when you try to open the manual enter @benelliforum.com :clap:
 
1 - 3 of 3 Posts
Top