Benelli Forum banner
1 - 1 of 1 Posts

Discussion Starter · #1 ·
Meant to say to all you TNT owners,
while checking the TNT out for loose bolts, correct chain adj etc,etc I noticed that the rear tyre had been rubbing significantly on the rear brake line where the swinging arm bends (to the front of the tyre edge) I cured it by putting 2 zip ties on, to pull the brake pipe and speedo wire back to the swinging arm if I hadnt seen it I think the 014 would have certainly worn through the braided pipe dumping all of my fluid ………….say no more please all check your bikes.
1 - 1 of 1 Posts