Benelli Forum banner
1 - 20 of 27 Posts

·
TnT explosive tester
Joined
·
1,011 Posts
Discussion Starter · #1 ·
hi I know its hard to find aftermarket levers for these bikes

so has anyone seen any?

does anyone know if any other bike fits the 899s tnt

im looking for short adjustable levers in particular

pazzo crg etc
 

·
Junior Member
Joined
·
442 Posts
G'day Dynamo
the only one i have found so far that sell Pazzo's is Maniac Motors.
i have been looking for a set of Pazzo's for the last year and a bit.
and only come up with Alex from maniac motors.i have email him and there going for,250 euros a set.
i guess we could ask Alex if he could do a group buy for Pazzo's
so the more that buy them the cheaper they will be.:D
i hope Alex gets on the forum and reads this then.

madwog
(26,096km)
 

·
TnT explosive tester
Joined
·
1,011 Posts
Discussion Starter · #3 ·
250 for a set of pazzo's is expensive

I have not got my TnT yet as moto scozia in Edinburgh will not open till july probably

So I cant make an deals till then but would be intersted

I seen guy used the master cylender from a z1009 etc and just bought z1000 levers

Also someone said that aprilia 125 clutch levers fitted some of the Benelli's

If they fitted the TnT the brake levers would only have to be bought from maniac
 

·
Registered
Joined
·
207 Posts
well usaly a pair of Pazzos is 209 including german VAT (19%) but to use it on a Benelli at the clutch side you need another Cabelmechanic because no pazzo fitts to the benellimechanic, this is the reason why it is 250 inclunding VAT and new mechanic.
so if you want levers we have the BB that fitts to all original at the Benelli
for about 180 including VAt

ciao Alex
any group buy is not a problem if we get a high nr so i can get a cool price from the manufacturer
 

·
TnT explosive tester
Joined
·
1,011 Posts
Discussion Starter · #5 ·
Ok maniac motors thanks for the reply which I understand means the clutch needs a new lever body/connection and thats what makes them dearer. You obviously took some time to set this up and I thank you for doing this


but im unsure what u mean by this line

so if you want levers we have the BB that fitts to all original at the Benelli
for about 180 including VAt


What does BB mean and is 180 pounds or euros

As i mentioned in my post i have not got my TnT yet, till moto scozia open up here in edinburgh but i will require levers at that time
 

·
Junior Member
Joined
·
442 Posts
I would be intrested in a pair of Pazzo's Alex.
short black levers with red adjusters
both brake and clutch.:D
 

·
Registered
Joined
·
207 Posts
well no problem Black/Red in short incl. Leverbody is in stock
so plz write Katrin a mail under [email protected] she will manage the rest to get you the levers;)

yes bb are a different producer of levers you can see it on our HP, and this levers fitts without changing anything.

ciao Alex
 

·
Registered
Joined
·
784 Posts
.....

Alex, what is the model number of the Pazzo Brake lever for the TnT's?



I purchased one using the list found on this site and it didn't work....:doh:

After some research it seems to be Pazzo F-16 the same used on the Aprilia Caponord/EVT1000

If I am incorrect. I hope someone chimes in...
 

·
Senior Post Whore
Joined
·
2,931 Posts
Dynamo, do a search for Titax levers on fleabay. They come in at just under £60 a lever.

http://shop.ebay.co.uk/items/_W0QQ_...m270.l1313&_odkw=titax+short+levers&_osacat=0

I gave the company a call to see how long it would take to get the stubby folding levers and the woman told me that Titax where a really slow company to deal with. Said I might get them in time for next year:mad:

Still, at that prive I might just go ahead and order a set anyway;)

Al:D
 

·
Junior Member
Joined
·
442 Posts
Has anyone looked on the TITAX home site.
they have a nice looking pair of levers call,streetfighter.
they look like good ones to get.if i can find anywere here to order then.
 

·
Senior Post Whore
Joined
·
2,931 Posts
If you need someone to order them for you buddy over here and send them to you then just drop me a pm matey. I've spoken to a company that deals with Titax and they've admitted that they are really slow in getting orders out to suppliers so that they can keep up with the demand for their customers:(

Al:D

I might just be putting an order in for a set of stubbies for myself too.:D
 

·
Junior Member
Joined
·
442 Posts
I just emailed a dude here i oz,they should get back to me tomorrow.but if they can't get what i want i will give you a PM and get ya to get them for me Big Al.if thats allright with you.
but have you seen those streetfighter levers, there better looking than the standered ones there got.

Thanks BIG BAD AL

madwog
(26.710km)

HERE IS THE STREETFIGHTER ONE'S
 

·
TnT explosive tester
Joined
·
1,011 Posts
Discussion Starter · #17 ·
They both look nice

The only difference I can see is there is no holes where the fingers go in the streetfighter version

I saw ASV levers yesterday in hein gericke and they were very nice, a really rich anodising
 

·
Junior Member
Joined
·
442 Posts
DID SAME MORE SEARCHING AND I CAME UP WITH, Wayne Gardner Enterprises
THIS IS THE EMAIL THEY SENT ME

Steven,

Thanks for your enquiry regarding Titax Levers for your Benelli.
At the moment, we are only bringing in the Std and Short Levers. If you would like the Streetfighter Levers, we can special order them for you.

Regards,

Lindsay Fowler
National Sales Manager


Wayne Gardner Enterprises

PH: 02 42262999
FX: 02 42295800
www.wgardner.com

I RANG HIM TODAY AND HE TOLD ME THAT THE STREEFIGHTER LEVERS COULD TAKE 2 MONTHS TO ARRIVE,I MIGHT SEE AND WAIT FOR THEM.
PRICE WAS $349.00AUS A PAIR FOR THE STANDERED ONES,DON'T KNOW FOR THE SF ONES.

MADWOG
(26,809KM)
 

·
Registered
Joined
·
346 Posts
Ducati 996 levers fit the 1130CR... I'd be willing to bet that they'd fit your bike as well..
Take a look at the numbers on the back of the lever to confirm this. Then just get some Ducati levers (Pazzos for Ducs are $175USD)
 
1 - 20 of 27 Posts
Top