Benelli Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hi i have a 57reg tre 1130 k and its developed a fault where it loses its lights and power ! You roll to a sop and leave it a little while and it starts and rides! Any ideas please! I checked its chrging and was reading 14.4v i tried another battery [although not new] and still the same!
 

·
Registered
Joined
·
1,146 Posts
this issue is more than likely the side stand switch . a real easy fix either bypass it (not one id do ),
best fix is to take it off bike open the back up and stretch the tiny spring inside to make a better contact to the copper switch plate.
i had a trip away one year and it plagued my journey just cutting out randomly no power or headlights.
testing the switch for continuity just isnt good enough i know .... you need to do the spring stretch for the added pressure to hold the signal to the ecu .
but please also look at the main fuse on the starter solenoid.

hope this helps out Rick
 
1 - 9 of 9 Posts
Top