Benelli Forum banner
1 - 7 of 7 Posts

·
Senior Member
Joined
·
5,929 Posts
Discussion Starter · #1 ·
See pg. 50 of the Tornado Workshop Manual.
These tubes are supposed to be changed every 16,000 kms.
Why would it/they need changing? Do they clog up?

The only oil tube I know of is the one on the LHS that feeds the camshafts & chain.

Anyone ever had it changed?
Can't remember anyone ever talking about it.
 

·
Registered
Joined
·
1,074 Posts
Oddly enough I was wondering about that one as well Errol.
I did the word search on the Adobe document my manual is formatted on and it doesnt find any other reference to Oil circulating pipes or oil circulating, so i have no idea, perhaps Russ could impart his wisdom and advise us !!

Mind you the servicing guide also says you should check headlight and adjustment every service, but FREDZEDEX has just found out his had a wrong lamp fitted despite previous MOT checks, PDI and servicing being done, go figure, Steve.
 

·
Registered
Joined
·
864 Posts
Mind you the servicing guide also says you should check headlight and adjustment every service, but FREDZEDEX has just found out his had a wrong lamp fitted despite previous MOT checks, PDI and servicing being done, go figure, Steve.
See my previous post about this issue Here

I would advise everyone to check theirs!
 

·
Registered
Joined
·
1,074 Posts
Good advice that, I went straight out into the garage when I heard about Freds , phew its was dipped to the left, Anadin dont give you relief like that, Steve.
 
1 - 7 of 7 Posts
Top