Benelli Forum banner

1 - 1 of 1 Posts
G

·
Discussion Starter · #1 ·
oil warning&speedo

after refuelling i turned ign on(hands do the sweep,noticed red led for oil pressure only on while hands sweeping) noticed the oil led and lcd oil letters were not coming on (they come on alternately then go off once started up)i gently rode home and also noticed the speedo was about 90% too slow, have i got the dreaded clock prob??? (new one £300 approx)
got home checked voltage at oil sender unit approx 9.8 volts is this right??
ohms check on oil sender switch (engine off) =continuity
no voltage at violet wire(colour from w/shop manual) at connector block for clocks.
hope someone can help!

regards colin
 
1 - 1 of 1 Posts
Top