Benelli Forum banner
1 - 11 of 11 Posts

·
Junior Member
Joined
·
442 Posts
Discussion Starter · #1 ·
Just to let you guy's out there know that i fitted my Pazzo levers i got from maniac motors, and the new clutch assembly worked out to be a really good fit.i'm very happy with them.:D photo's in members gallery
thanks Alex...

madwog
(30,096km)
 

·
TnT explosive tester
Joined
·
1,011 Posts
I went for the short gold titax levers [same but different name really]

There is so much more control than standard levers

 

·
Junior Member
Joined
·
442 Posts
Discussion Starter · #4 ·
I went for the short gold titax levers [same but different name really]

There is so much more control than standard levers




Yes i noticed there was more control with them, especially the front brake was more touchy.:)
 

·
Registered
Joined
·
784 Posts
...

Yes, both units will work.

The ones from the great people at Maniac (pazzo levers) and the ones from Titax.

I personally went with the pazzos after I did the hydraulic conversion to my TnT. Also at the time the only option available were the ones thru group buys on the board.

Whichever you opt to buy will definately make the feel of both brakes and clutch different.

Good Luck
 

·
TnT explosive tester
Joined
·
1,011 Posts
As of yet titax dont sell a lever in Britain to fit the benelli clutch although they list one

I did a small mod of my own to make one fit

Best idea is to use maniac if you live in Europe m8
 

·
Junior Member
Joined
·
442 Posts
Discussion Starter · #8 ·
Yeah DR is right,at maniac motors you also get the clutch assembly to go with the lever all works really well.
just ask Alex or Katrin they will help you .:)
 

·
Registered
Joined
·
23 Posts
Thanks for the reply guys! The only reason I am asking is that even in the Benelli Officine catalogue, it shows the upgrade levers but is QUITE specific about it NOT fitting the CR! Hence the somewhat dumb question....

BTW gents, I am based in Melbourne AUS! G'day to everyone on the board!

Cheers
Ram
 

·
Junior Member
Joined
·
442 Posts
Discussion Starter · #11 ·
Hang on a minute...that's true your's is different (CR) to the other tnt.
just email maniac motors and they will be able to tell you.
 
1 - 11 of 11 Posts
Top