Benelli Forum banner
1 - 11 of 11 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
I have finally found a replacement for a wider foot peg on the 1130 Trek Amazonas. Puig Enduro peg & adapters for a yamaha 2008- 2010 R6 From revzilla.
You just need to grind a bit off the back of the adapter drill a small hole in the adapter for the spring to position in. You still use the original pin & spring & circlip. They cost about $160 US.
 

·
Registered
Joined
·
166 Posts
I have finally found a replacement for a wider foot peg on the 1130 Trek Amazonas. Puig Enduro peg & adapters for a yamaha 2008- 2010 R6 From revzilla.
You just need to grind a bit off the back of the adapter drill a small hole in the adapter for the spring to position in. You still use the original pin & spring & circlip. They cost about $160 US.
An R6? Like the sportbike? I so need these
 

·
Registered
Joined
·
166 Posts
Well they look fantastic. I had some kx250 pegs with hangers but i just couldn't work out a viable way of fitting them without a big fabrication job. In the meantime i found some cool black ones on aliexpress for £13.24.
Automotive tire Bicycle part Wood Bumper Sports equipment
Tire Automotive tire Bumper Gas Asphalt
 
1 - 11 of 11 Posts
Top