Benelli Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
203 Posts
On my 2012 model CR, the ignition map is set at -3 degrees retard at TPS no.2 up to 400 rpm. The 160R map has rpm +3 degrees advance at 400 rpm at TPS position 4 and position 6 it has 4 degrees. So if you open the throttle whilst starting, or if the TPS is not zero-ed in, there is a chance the engine can kick back against the sprag clutch. My suggestion would be to remap the ignition map to similar to the earlier models.
 

·
Registered
TNT R160
Joined
·
248 Posts
Discussion Starter · #5 ·
could have been to do with the fading starter clutch that I started opening the throttle a bit. I have not heard it kicking back when starting. I took a screenshot of the i map because I dont really sure which is map 1 and 0 ( button in or out ).

Colorfulness Rectangle Font Line Slope
 

·
Registered
TNT R160
Joined
·
248 Posts
Discussion Starter · #7 ·
Gas Wire Electrical wiring Circle Metal

Santi came early and brought some expensive gifts for my Nelli all the way from Maniac Motors.
I hope she will like it this time 😬.
For the few of you who don't know what I mean
..... This is 3rd time changing the starter clutch and the 2nd time with brand new parts.
Ouch....🤮
I also have fresh oil and filter ordered and on the way.
 
1 - 7 of 7 Posts
Top