Benelli Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
736 Posts
Discussion Starter · #1 ·
Next project:
Does anyone know if a 900RS slipper clutch will fit a TNT? (Rusty?)
Seems I have a spare one and I thought I would try it as the option to convert to a dry clutch is WAY too expensive!! (even for a Rich old shandy pants from down sarf!!!!!!)
 

·
Registered
Joined
·
68 Posts
They both use the same clutch baskets and clutch plates, just change the inner hub, hub centre and slipper springs. I'd listed the part numbers in an earlier thread if anyone wanted to make the change.

Personally, I'd put the TnT clutch hub in the 900's, the clutch plates will last longer.
 
1 - 4 of 4 Posts
Top