Benelli Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
1,888 Posts
Warning lights still working but no display on the LCD right? If so the dash is probably blown and needs replacement.
 

·
Senior Member
Joined
·
1,841 Posts
The sensor may be miss-aligned, on the rear swinging arm by the disc is the sensor (fixed by 4 allen screws) the gap between disc bolts and it should be 1mm or less to enable it to get a pulse. Also check the plug to the loom situated near the brake pipe guard.
Does it read 0, or nothing at all ?
 

·
TnT explosive tester
Joined
·
1,011 Posts
Has it got wet? they can stop working in the rain and then dry out after

There is also a connector under the tank area which is worth looking at
 
1 - 5 of 5 Posts
Top