Benelli Forum banner

1 - 9 of 9 Posts

·
Senior Member
Joined
·
463 Posts
Bad luck Mike, the only thing i can think of is somethihg like Rhino protect or invisishield, its been discussed on here recently.:doh:
 

·
Senior Member
Joined
·
5,891 Posts
Mike, if you're looking at something similar to what has been made up for the Tornado, you could possibly approach the mob in Melbourne that did that one. Can't remember their name at the moment, but Lawrence probably knows.
 

·
Senior Member
Joined
·
3,081 Posts
tnt tankie protector

I believe the benelli /AMI commissioned ones were from Geelong Carbon Craft for the tornado, and CF maker in Vic should easilt be able to mould the TnT tank, as its a easier moulf than a Tornado one, maybe www.carbon.sk does one ?? Lord knows they do every other CF bit you could imagine for a TnT.
 

·
Registered
Joined
·
56 Posts
Tank Protector

Hi Mike.

Benelli actually do one in the Special Parts catalogue contact Brian at Benelli UK.(KJM Superbike)

Regards.

Nick
 

·
Registered
Joined
·
209 Posts
Does anyone know where I can find a parts and accessories catalog online ? I've not been able to find one. Ideally I'd love to see something like http://www.af1racing.com's online store. It's an awesome Aprilia one stop shop !

ciao
Derek
 

·
Registered
Joined
·
736 Posts
Online stores

The only real Benelli online store that i`ve found is
http://www.benelli.maniacmotors.de/exclusiv_orig.html

there are other sites and I know Brian at KJM is building a stock of parts for Benelli models.:bow: :bow:
Lots of other sites too for other bits like Carpimoto in Italyhttp://www.carpimoto.com/content/prod/l_EN/s_1_Home/fi_17_Matris/pr_30024_Matris_Fork_Cartridge_Kit_for_Benelli_TNT_1130_rebound_and_compression_on_each_fork.htm

Peter Wack from Carbon.sk for bodywork bits.

Maybe we should get a list going of links to sites like these????:clap: :clap:
 

·
Senior Member
Joined
·
3,081 Posts
We do

matching parts and accessories, maybe it time to start trawling the forum and searching for older posting and putting them in there ?
 

·
I'm firing on three
Joined
·
611 Posts
The only real Benelli online store that i`ve found is
http://www.benelli.maniacmotors.de/exclusiv_orig.html

there are other sites and I know Brian at KJM is building a stock of parts for Benelli models.:bow: :bow:
Lots of other sites too for other bits like Carpimoto in Italyhttp://www.carpimoto.com/content/prod/l_EN/s_1_Home/fi_17_Matris/pr_30024_Matris_Fork_Cartridge_Kit_for_Benelli_TNT_1130_rebound_and_compression_on_each_fork.htm

Peter Wack from Carbon.sk for bodywork bits.



Maybe we should get a list going of links to sites like these????:clap: :clap:
dont forget http://www.brabantmotors.nl/Accessoires/TNT 1130.htm
Terry
 
1 - 9 of 9 Posts
Top