Benelli Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
976 Posts
You have got a real problem now,
Taking the pump from the tank is not a problem, undo the fixings and the pump comes out with an O ring seal around the perimeter.
Unless you can get the bit of plastic out of the pump , you are buggered. New pump required , not cheap !!
if you can get it out you can get a new 90 degree angle to push in to the tank , one off one time fix , then create a new coupling under the tank.
 

·
Registered
Joined
·
976 Posts
I'm wondering if a larger barbed fitting would hold
No , it wont. Scaled reptile Snake Plant Pipe Tail
This is the original fitting you had , with the banjo fitting to the fuel rail. If you fit this , you wont be able to get it back out now the clips are broken.


Hand tool Tool Metalworking hand tool Composite material Metal
This is the end that fits in the tank.




Tool Cable Auto part Camera accessory Font
you need this type of fitting with a coupler connecting to the fuel pipe feed to the fuel rail, you can then unplug the fuel pipe here, leaving the smooth push fit sleeve in the tank..
 
1 - 2 of 2 Posts
Top