[jogant]

Hi all. Decided to start learning TuneECU. And when I first connected, I noticed the values of throttle. It seems that all 3 values should be the same. Or I'm wrong?

Hello
What 3 values are you talking about?
0.82 = closed throttle voltage (idle gas)
4.12 = voltage at full throttle
0 = should be trottle position in degrees

Gretting Josef

 

[jogant]

Hello. Thanks for the answer. I'm trying to understand how to work with TuneECU by studying the forums. One of them confused me. Someone wrote that these values show the position of the throttle on each cylinder.

Hello.
The person probably confused that with Triumph motorcycles. There you can generally show a lot more.

There's not much going on with Benelli. But that depends on the ECU.
You have to manually check and adjust the synchronization of the throttle valves.
A TPS rest is done with the software.
You can also change the mixture setting for the entire map and the idle speed for both maps.
I always use the Windows software for Benelli to save a new or edited map to the ECU. With Android software I have upload problems.
For all other motorcycles or for editing maps (including Benelli MAPs) I use the Android version.

Have you read the user manual for the software?

Greetings Josef