Benelli Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi,

I have a 2019 125 TNT and have a problem with the dash, when I start the bike the lights on the dash come on but the rev counter needle does not move and the digital display does not show any information.

I've tried a new battery and given it a full charge but still no joy, I've check all the connectors behind the dash and can't see any issues.

Anyone else had this problem and know how to fix?

Thank you in advance.
 

·
Registered
Joined
·
4 Posts
I found the fix for my problem.
Basically it was just bad wire connection.
Remove the cluster, there will be 3 sockets. Just clean them and plug in again. If still does not work. Just buy new socket, clean the wires, must be all shiny. Install and check. It should work.
In my case there is a catch. Mine only works if I left one of nine wires open and not plugged in. That way only my digital display shows, else it does not show up.

If you see any wire black in colour instead of copper shiny. Just remove the black layer by sandpaper or knife.

It saved my Rs 15,000. The new socket cost me Rs 50.
 
1 - 4 of 4 Posts
Top