Benelli Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
846 Posts
Discussion Starter · #1 ·
I have been having some issues with my TreK, and would like to look at the set up Via Tune ECU.
It looks like Tune ECU has now went over to an app based Tablet program, and the PC/Windows software is no longer supported.
But the Nelly programs all say that you must use a lead to connect........therefore needing the PC ........

I have the leads for both Walbro and Sagem, so can anyone let me have the Windows Nelly Tune ecu software, so I can connect?
I managed to get some software from a Triumph site.....but no go........
 
  • Like
Reactions: Rick67

·
Registered
Joined
·
679 Posts
Pm me your email address and I will send it. You can use tuneecu on an android tablet with on other adaptor
 

·
Registered
Joined
·
846 Posts
Discussion Starter · #6 ·
Just an update, a few weeks ago I managed to get hold of an old PC which did the trick. New PCs that run later versions of windows do not run with Tune ECU and the drivers. Get hold of an old PC, and keep it for the garage!!!!!
My main issue was that when I changed the battery and battery leads, the TPS went out of synch.
I was chasing a missfire (coil stick) and the fact that my TPS was at 14% when closed.
All reset now and sorted..........
Thanks for everyone's advice and help.


John.
 
1 - 6 of 6 Posts
Top