Benelli Forum banner
1 - 4 of 4 Posts

·
Waiting for the AA
Joined
·
54 Posts
Discussion Starter · #1 ·
Anyone pulled the tail piece off their tornado?

Got a trackday on Sunday. The mirrors are easy to remove, one screw each.

But the tail piece looks easy, three screws, but where is the connector?

If it's easier, i might just unscrew the plate
 

·
Senior Member
Joined
·
1,841 Posts
I take it you mean the indicators number plate holder thing, the middle bolt at the rear can be a bugger to get back in as the spring clip it goes in bends and it is very difficult to get clip out without removing the seat,but is just possible. I would just do plate ! If you do take it off i think there are connectors tucked up in the void just behind the plate.
 

·
VIN#ten
Joined
·
136 Posts
I take it you mean the indicators number plate holder thing, the middle bolt at the rear can be a bugger to get back in as the spring clip it goes in bends and it is very difficult to get clip out without removing the seat,but is just possible. I would just do plate ! If you do take it off i think there are connectors tucked up in the void just behind the plate.
Done all that :confused: :mad: :eek: :D I second the proposed plate removal.:doh:
 
1 - 4 of 4 Posts
Top