Benelli Forum banner
1 - 1 of 1 Posts

Senior Member
5,963 Posts
Discussion Starter · #1 ·
I think the manual must be joking!

Page 172 under Gearbox, section 5.9.7 "Assemble Gear", when reassembling the Drum (7), the manual states "10Nm + Loctite 270".

Loctite 270 is a high strength thread locker, intended for bolts > 25mm & for fixing parts that do NOT require disassembly. Disassembly will require heating to 250C to weaken the joint. I rather think you don't want to do that.

The screw (8) is way smaller than 25mm (!) & there wasn't any kind of thread locker on the screw when I disassembled it, so I used 243 when I put it back together, just to help it a little.
1 - 1 of 1 Posts