Benelli Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
164 Posts
Discussion Starter · #3 ·
Cable info

What does the Sagem cable look like?
 

·
Cafe Racer member
Joined
·
676 Posts
The extra little plug is just a wire loop that enables the ECU to be written too on the walbro unit.
The Sagem ECU might have the data transmit / receive wires in a different location to the Walbro unit, otherwise it should work.
Is your laptop recognizing the tuneboy usb cable. You might have to install drivers for it and set up a coms port to work with the USB and disable the coms port in the bios if you have a built in coms port.

Paul
 

·
Senior Member
Joined
·
1,841 Posts
From Tuneboy site it sounds as if it is different,apparently the cable has some components built in so it may be a prob to mod.
colin..
 

·
Registered
Joined
·
164 Posts
Discussion Starter · #8 ·
Cable issues

I followed the tutorial on the tuneboy site - somewhat involved for a cable driver install I must say.

I tried the install on a laptop and after having trouble I tried it on a desktop as well; both recognized the cable.

At this point I have sent off an email to tuneboy support with a picture of the cable so they can tell me what the deal is.
 
1 - 8 of 8 Posts
Top