Benelli Forum banner
1 - 20 of 20 Posts

·
Registered
Joined
·
46 Posts
Discussion Starter · #1 ·
Before I put in the order, maybe someone has some parts out there from this list? Easier parts would be the turn signals, throttle tube, throttle cables, rear right signal, pillion seat cover. Maybe the inner fairings bits as well.

thanks.


Fiche NumberPart NumberDescriptionQTY
15R21814821AUpper Inner Right Fairing1
16R21814831AUpper Inner Left Fairing1
18R21814801ACover RH1
19R21814811ACover LH1
12R90750198ESm. Inner Cover Screws2
2R90750051AWindscreen Well Nut4
3R90450438EWindscreen Screw4
4R92050138HWindscreen Washer4
1R21814191ABULeft Mirror Green1
2R21814181ABURight Mirror Green1
3R21814441ARubber pad, mirror2
4R95050141AQuick Fastening, mirror4
5R9555025M9Rivet Mirror4
11R180174196000Screw, mirror2
6R21814021ABUUpper Fairing Right Green1
7R21814011ABUUpper Fairing Left Green1
11R180100143000Fuel Release Tool1
7R180278001000Front Right Indicator1
8R180278002000Front Left Indicator1
3R180260106000Throttle Cable Closing1
4R180260104000Throttle Cable Opening1
1R21413291AThrottle Tube1
5R90752302BScrew nylon washer (4x)4
10R1802741990BUSaddle Cover Green1
11R180279164000Rubber Pad R, Saddle Cover1
12R180279165000Rubber Pad L, Saddle Cover1
 

·
Registered
Joined
·
1,215 Posts
That's a pricey list .... If you can get them .
Canary trek on here has throttle cables probably the throttle tube too if it's the same parts as a TreK .... I got my cables made at Speedy Cables in South Wales u
 

·
Registered
Joined
·
50 Posts
If anything from my beast bellow comes into account for your Tornado - let me know, i am parting it out.

2 months ago, my gearbox 2nd gear tooth broke of, came between the sprockets, stuck the wheel and violently cracked the block through gearbox cover. Put in new used gearbox, fixed the crack, and few days ago started to bang a lot on the clutch side - i give up sorting this bike, it was working flawless for 20.000 km (bought it with 30k on the clock) and last year, i put over 3.000 eur in it (timing chain, new clutch basket, both sprockets, chain, spark plugs, filters, oil pump, water pump, throttle sync, valve settings....), and now i decided to stop. I suspect loosen z25 as it already happened once, and damage to clutch basket - wont even take a look but it bangs like horror.

Would fix it, but only if i would be able to get new 0 km engine, but thats a unicorn tale story :D


Everything still available - all parts which have been changed, i have kept the original (brake clutch levers, screen, exhaust,...)

. Tire Wheel Vehicle Fuel tank Hood
Vehicle Light Automotive lighting Hood Automotive tire
Tire Wheel Vehicle Fuel tank Automotive lighting
Wheel Tire Fuel tank Vehicle Automotive fuel system
 

·
Registered
Joined
·
46 Posts
Discussion Starter · #6 ·
I put in an order for the parts. It's been a month and haven't heard anything about parts shipping. Trying to get a hold of seller to see if I can knock some line items off.

The interesting part was that some of the part were cheaper to buy OEM than aftermarket.

Thanks to the offers above. I will see if I can change things in the order to take up the offers.
 

·
Registered
Joined
·
46 Posts
Discussion Starter · #11 ·
I am waiting on Maniac Motors to see what parts he is able to get me. Hopefully He can find the important parts I won't be able to make or source alternatives.

If he doesn't have those mirror mounts, I might see about 3D printing my own, or I can make from silicone. I've made molds for silicone parts before.
 

·
Registered
Joined
·
967 Posts
I am waiting on Maniac Motors to see what parts he is able to get me. Hopefully He can find the important parts I won't be able to make or source alternatives.

If he doesn't have those mirror mounts, I might see about 3D printing my own, or I can make from silicone. I've made molds for silicone parts before.
You can cut your own from 5 mm foam strip , it comes with adhesive on on side. you can shape it and fit it in the recess of the top fairing hole. as the mirror is clamped into it , it compress,s to support the mirror and stops it rocking.
 

·
Registered
Joined
·
10 Posts
You can cut your own from 5 mm foam strip , it comes with adhesive on on side. you can shape it and fit it in the recess of the top fairing hole. as the mirror is clamped into it , it compress,s to support the mirror and stops it rocking.
I have already made a rubber pad made of a 2mm foam strip. It is not perfect. Maybe I can find a heavy duty rubber strip. 3D printing would be also a good idea.
Thank you for your help.
Wood Creative arts Tints and shades Moustache Jewellery
 

·
Registered
Joined
·
46 Posts
Discussion Starter · #14 ·
MM has replied to my parts list. The tricky ones were not able to get. I still need to find a source for front turn signals. Haven't found a source for the X49 scooter parts that looked legitimate.
I think someone was asking about replacement throttle cables. He was able to get those for me.

I will need to find the small LH inner panel cover used somewhere.
 

·
Super Moderator
Joined
·
7,816 Posts
Of course, if you want to upgrade to a pair of new LED indicators, I could sell you these beauties. :)

Guitar accessory Automotive lighting Amber Musical instrument accessory Font
 
1 - 20 of 20 Posts
Top