Benelli Forum banner

Balance Shaft Cover - OIL

4.2K views 20 replies 7 participants last post by  haydn  
From manual
Benelli suggests to use a fully synthetic
engine oil having characteristics equal or better than the ones prescribed in the following standards:
• API SJ
• ACEA A3
• JASO - MA CC MC G4
There is no need to drain the remaining oil,just top up with an oil that meets the standards above.The manual states 15/50 thats what I would use.
 
Hi the 10/60 will be fine,it is just a wider heat range. put simply the 10 means it acts like a 10 weight when cold,ie it gets around the engine quickly. The 60 means it acts like a 60 weight when hot, ie it protects the same as a straight 60w.You can mix mineral,semi or syn.
colin..