Benelli Forum banner
21 - 32 of 32 Posts
My bike randomly cuts out mainly when pulling up at junctions. It starts again easily when warm but a bit of a pain when cold(it starts ok cold if I open the throttle slightly) and it cut out on a long downhill. I have fitted a new stepper, plugs, balanced throttle bodies and set tick over. Any other ideas please
I'm a new rider I have the Benelli tornado 7miles only brand new took it for a ride literally round the corner engine light came on revs dropped and it cut out
 
My bike randomly cuts out mainly when pulling up at junctions. It starts again easily when warm but a bit of a pain when cold(it starts ok cold if I open the throttle slightly) and it cut out on a long downhill. I have fitted a new stepper, plugs, balanced throttle bodies and set tick over. Any other ideas please
Sticky Stepper Motor. A few rides should cure it.
Thankyou
 
21 - 32 of 32 Posts